Arai GP-6 PED (W/M6 studs) inc FHR posts

The GP-6 PED is very similar to the GP-6 RC, but with a Super Complex Laminate Construction (SCLC) outer shell, and it complies with the FIA 8858-2010 regulations. The clearPerformance Enhancing Devices (PED) spoilers offer added stability and resistance against buffeting. The kit also increases the ventilation by directing more air into the ventilation slots at the front and increasing the venturi exhaust effect at the rear. Arai PED Kit comes in clear plastic to allow the paint on your helmet to shine through or it can be painted to accent your current helmet theme. Fire resistant lining made of three materials: Carbon Nit ®, Nomex® and Conex® fabrics. Yellow Kevlar® chin straps. Comes with FHR M6 studs.

Features:

• Large10mm intake and exhaust holes for increased airflow (front vents are closeable)
• New shield pivot hardware with redesigned track slider for improved aerodynamics
• Wider eye port for increased peripheral vision
• New positive shield locking mechanism provides solid shield latching while allowing normal operation
• FHR M6 studs
• Arai 6 Series 3mm thick visor (not interchangeable with GP-5) SNELL SAH2015 APPROVED

 SIZING INFORMATION

Fit the measured size. Focus on your head size (crown fit) measurement first, e.g. the area contacted by a baseball caps' band. Do not be concerned with facial fit at this stage. When you can't get the helmet past your cheeks or jaws, do not think it's too small and reach for a bigger size. The helmet must fit your head!

How? Remove the cheek pads and try on helmet sizes until you get that snug crown fit. For the most comfort the interior must fit snugly all around the crown of your head. You should feel some pressure at all the contact points around the interior perimeter, too much pressure could become uncomfortable in the future.

Finally, Arai's optional cheek pad thicknesses, and on some models the replaceable interiors, can fine-tune your personal fit. All Arai cheek pads can be replaced with a size that better suits your facial structure. But this fit should be addressed only when the crown size is correct.

Besides the replaceable cheek pads, selected models feature the "Peel-away Cheek Pad Layer" and "Peel-away Temple Pad Layer". The pads of these models can be made thinner easily by removing a 5 mm thick peel-away layer for added room if needed.

In special cases, Arai helmets can be made to measure.

We offer up to 6 different sizes outer shells. Unlike many other manufacturers Arai provides one size outer shell for each two helmet sizes for most models, adding up to four outer shell sizes within limited models. Starting with XXXS (49-50) for really small heads up to XXXL (65-66) for really large heads.

DELIVERY LEAD TIME: 2-3 working days.
DELIVERY LEAD TIME (when out of stock): approx. 10 working days. Lead times may be longer if the product is not in stock with the manufacturer.